60
86105 BA-en/00
English ⋅ Nautilus
®
T
Device description
NAUTILUS
®
T does not come with a pyrometer and
thus no temperature measurement. The casting
process must be carried out manually while
observing the melt. Casting and diagnostic
protocols without a specification of the casting
temperature are not conclusive and, thus, not
possible. However, the device can be updated with
the aid of a USB flash drive (not included in scope of
delivery).
1Camera
2 Touchscreen
3 Main switch
4 Mould door
5 Crucible door
Overview
After the device has been switched on, the following
functions can be called up via the touchscreen:
Casting
"Casting" can be started once the alloy has been
selected.
Settings
This is where, for instance, new program locations
for non-BEGO alloys are set up.
To Next Page
Loading...
Need help?
General
