EasyManuals Logo

Bego Nautilus T Translation Of The Original Instructions

Default Icon
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
44
86066 BA-en/00 357.00001.../ 358.00001...
English
Nautilus
®
CC plus
Nautilus
®
T
en
Maintenance
Any opening of the housing that is not described in
this operating manual may only be carried out by
Customer Service staff or persons designated by
Customer Service!
Metallic housings must be grounded properly so as
to prevent them from carrying current. Otherwise
they are extremely dangerous because the
housings may be live due to damage to the
machine!
Since a check to ensure a de-energized state* is
mandatory every time the device is opened, only
qualified electricians may open the device!
* Germany: check in accordance with DIN
VDE 0701-1.
Maintenance of safety-relevant compo-
nents
The unit has been designed for a service life of 10
years from the date of manufacture. No liability is
accepted for damages arising from operation of the
unit after this period.
Safety-relevant components must be checked
regularly and replaced as required. This work must
be carried out solely by BEGO customer service or
by repair centres authorised by BEGO customer
service. To that end, users are recommended to
take out a maintenance agreement covering annual
checks (or checks after every 10,000 castings) and
a check after five years (or after 50,000 castings).
Regular maintenance
Regular maintenance is required to ensure correct
operation. For the display of the number of castings
see "Show machine data" on page 40.
Every 100 castings
Clean the crucible and mould chamber (vacu-
um clean),
Clean window,
Clean gaskets and seals.
Every 500 castings
Drain the pressure reducers
Every 3,000 castings
Clean ejector,
Replace the air filter.
Every 10,000 castings (or annually)
Inspection of safety-relevant components by
BEGO Customer Service
After 50,000 castings (or after 5 years)
Replacement of safety-relevant components by
BEGO Customer Service
DANGER
Warning of electric shock!
Danger to life!
Switch off the machine and pull out
the mains plug before performing any
care or maintenance work.
(In the case of power connection
without mains plug: remove fuses,
secure machine so it cannot be
switched on again and check that it is
de-energized.)
WARNING
Risk of burns due to hot parts!
Carry out maintenance and cleaning
work before casting or only after the
machine has cooled down.

Other manuals for Bego Nautilus T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bego Nautilus T and is the answer not in the manual?

Bego Nautilus T Specifications

General IconGeneral
BrandBego
ModelNautilus T
CategoryDental equipment
LanguageEnglish

Related product manuals