English
⋅
Nautilus
®
CC plus
⋅
Nautilus
®
T
45
86066 BA-en/00 357.00001.../ 358.00001...
Clean window
Every 100 casting operations the message "H 01"
appears
("Clean window!"). Clean the window as soon as
possible.
1. Swing the hinged screen to the side. In doing
so, grasp the base (see illustration), not the
optical waveguide that is sensitive to bending!
2. Loosen the nut with the socket wrench (part of
scope of delivery) and remove the viewing win-
dow.
3. Clean the ends with a dry cotton cloth (see
illustration). Check that it is clean against the
light.
Warning of electric shock!
Danger to life!
Switch off the machine and pull out
the mains plug.
(In the case of power connection
without mains plug: remove fuses,
secure machine so it cannot be
switched on again and check that it is
de-energized.)
Risk of burns due to hot parts!
Clean the viewing window with a
cotton cloth only when it has cooled
down (never use cloths made of
synthetic fibres!).
During assembly turn the socket
wrench only by hand and do not use
any other tools! The nut may turn in
the locking position.
To Next Page
Loading...
