Machine data export
Be aware that there are individual machine param-
eters for every device. These machine parameters
can be found on the supplied flash drive as well as
in the "Settings" menu on the device. In case data is
lost, the machine parameters can be exported from
the VARSEO S to a USB flash drive as follows:
1. Insert an empty USB flash drive into the VAR-
SEO S
2. Call up "Settings" > "User Menu".
3. Select "BCP File" when the button is high-
lighted in orange and the arrow points up.
The button will start to flash.
4. The data will be exported. Wait until the button
stops flashing.
5. Remove the flash drive.
6. Save the exported BCP file, accessible for
everybody, on the computer so that parame-
ters can be accessed easily afterwards.
Alternatively, the "Varseo S - Service Board" may be
used for the BCP export, which can be accessed via
the network in the browser.
To Next Page
Loading...
Need help?
General
