Operation via Web Interface
The Varseo S Service Board allows you to view the
printer and job information as well as setting
up/adjusting the Varseo S via a network interface.
1. Ensure that a network connection has been
established.
2. Start the workstation PC and call up the inter-
net browser.
3. Enter the device-specific web address of the
Varseo S in the address line (Varseo plus serial
number, e.g. "http://varseo38200101"). The
serial number can be found on the type plate
located next to the device's network connector.
Alternatively, enter the IP-address of the
printer into the browser (will be displayed in the
"Settings" menu).
4. The device-specific service board will be called
up.
Printer information
Next to specific device information, you will receive tips and tricks regarding the use of the Varseo S as well
as support information.
To Next Page
Loading...
