Settings
The Varseo S interface language and mix mode can
be selected in the "Settings" menu.
It is possible to set up the network connection:
1. Choose between Wifi and LAN.
2. LAN: Select "DCHP" under the LAN settings.
Wifi: Select the desired WLAN-network and
enter the network key.
(Please consult an IT expert when using the
expert mode).
3. Press the "Save" button.
Only connect the VARSEO S via LAN or WLAN;
otherwise, the host name cannot be clearly
allocated! Contact an IT expert, if needed.
To Next Page
Loading...
Need help?
General
