Need help?Do you have a question about the Beha-Amprobe ProInstall-75 and is the answer not in the manual?
General| Type | Multifunction Installation Tester |
|---|---|
| Continuity Test Current | >200 mA |
| Frequency Measurement | 45 Hz to 65 Hz |
| Display | LCD |
| Weight | 1.3 kg |
| Frequency Range | 45 Hz to 65 Hz |
| Continuity Test | Yes |
| RCD Testing | Yes |
| Phase Sequence Indication | Yes |
| Safety Rating | CAT III 500 V, CAT IV 300 V |
| Operating Temperature | -10 °C to 50 °C |
| Battery Type | AA |
Lists safety and standard symbols used in the user manual and on the device.
Details the items included in the shipping carton for the ProInstall-75 tester.
Describes how to use the rotary switch to select the desired test type.
Explains the function of the pushbuttons for controlling the tester and selecting results.
Identifies and describes the function of the tester's input terminals.
Lists and explains error codes that may appear on the tester display.
Details special configurations available when powering on the tester.
Instructions for measuring AC voltage and mains frequency.
Procedure for measuring insulation resistance using the tester.
Steps to perform a continuity test to verify connection integrity.
Guide to measuring loop and line impedance, including no-trip and hi-current modes.
Detailed procedure for measuring loop impedance in no trip mode.
Explains how to measure earth resistance using the loop test method.
Instructions for measuring line impedance, including L-N and L-L tests.
Detailed steps for measuring RCD tripping time, including Auto mode.
Procedure for measuring the RCD's tripping current by increasing test current.
Specific test procedure for RCD testing in IT systems with local grounding.
Instructions for testing and indicating the phase sequence of a power system.
Instructions for cleaning the tester's exterior and terminals.
Procedure for testing battery level and replacing batteries.
Procedure for manually checking the tester's fuse.
Provides a comprehensive list of the tester's features and included accessories.
Lists physical characteristics, operating conditions, and safety ratings of the tester.
Details accuracy specifications and measurement ranges for various electrical tests.
Lists the types of Residual Current Devices (RCDs) that the tester can test.
Describes the test signal waveforms used for different RCD types.
Details RCD current selection for various test functions and RCD types.
Explains how to perform mains wiring tests and interpret results.
Provides detailed operating ranges based on EN 61557 standards.
Details the operating uncertainties of the tester based on various influence quantities.
To Next Page
