EasyManua.ls Logo

BEHA UNITEST 93560 - Introduction; Scope of Supply; References Marked on Instrument or in Instruction Manual

BEHA UNITEST 93560
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
References marked on instrument or in instruction manual:
Symbol for the marking of electrical and electronic equipment (WEEE Direc-
tive 2002/96/EC).
Conform ity sym bol, the instr um ent com plies wit h the valid directives. It com -
plies w ith the EMV Directive (89/336/EEC). It does not complies with the Low
Voltage Directive (73/23/EEC).
The instruction manual contains information and references, necessary for
safe operation and maintenance of the instrument. Prior to using the instru-
ment the user is kindly requested to thoroughly read the instruction manual
and comply with it in all sections.
Failure to r ead the instruction m anual or to com ply w ith the warnings and references
contained herein can result in serious bodily injury or instrument damage.
1.0 Introduction / Scope of Supply
The instrument UNITEST Luxmeter 93560 represents a valuable support during
lighting system inspection, lighting intensity control, for the establishment of a
lighting intensity characteristic and for the control in compliance with the standard
value. The Luxmeter is equipped with the following features:
Measurement of light intensity
Calibrated in compliance with PTB standard using a standard illuminant lamp
2856 K
4 digit, numerical display
External Sensor
Carrying case
Automatic measurement range selection
Silicon-sensor
Data Hold
Data logger for 99 measurement data
Scope of supply:
1. Digital Luxmeter 93560
2. 6 pcs. batteries 1,5 V IEC LR03
3. Carrying case
4. Instruction manual
2

Related product manuals