3.1 Appropriate Usage
The instrument may only be used under those conditions and for those pur-
poses for which it was conceived. For this reason, in particular the safety re-
ferences, the technical data including environmental conditions and the
usage in dry environments must be followed.
When m odifying or changing the instrument, the operational safety is no lon-
ger ensured.
4.0 Preparation for Operation
4.1 Power Consumption
The instrumented is supplied by the batteries included in the scope of delivery.
4.2 Installing the batteries
Insert the batteries before instrum ent com missioning. For this, im peratively r espect
the references described regarding battery or storage battery handling.
• Remove the screws on the instrument rear.
• Remove the casing cover.
• Insert the battery supplied by respecting the polarity.
Correct positioning of accumulators is explained on the battery case bottom .
• Replace the casing cover and tighten with the screws.
5
To Next Page
Loading...
