Water/water heat exchanger – QWT, WTI, SWT, SWT-T
01.07.2015
18
Function
4 Function
In the QWT counterflow heat exchanger, the heat from the heating water circuit is transferred
to the pool water circuit.
In the WTI counterflow heat exchanger, the heat from the heating water circuit is transferred
to the pool water circuit. The WTI is manufactured from titanium and is suitable for use with
water with raised free chlorine values (e.g. brine pools, therapy pools, seawater pools).
In the SWT counterflow heat exchanger, the heat from the low temperature heating water
circuit or the solar system is transferred to the pool water circuit. The SWT-T is manufactured
from titanium and is suitable for use with water with raised free chlorine values (e.g. brine
pools, therapy pools, seawater pools).
A temperature sensor can be inserted into the integrated clamp in the immersion sleeve. In
combination with a control, the temperature of the pool water can be controlled via the
temperature controller.
To Next Page
Loading...
