Water/water heat exchanger – QWT, WTI, SWT, SWT-T
01.07.2015
5
Safety
1 Safety
1.1 Dangers in working with this heat exchanger
The heat exchanger is manufactured in accordance with the latest technological advances and
recognised safety regulations. However, it may be dangerous when in use, as follows
• injury to the operator or
• third parties, or
• faults on the heat exchanger or
• damage to other objects.
All persons involved with installation, commissioning, operation, maintenance and repair of the
heat exchanger must meet the following requirements
• mentally and physically qualified.
• appropriately qualified.
• carefully observe the installation instructions.
The heat exchanger must used under the following conditions only
• for the intended use.
• in perfect technically safe condition.
Faults that could affect safety must be repaired by a qualified plumber.
Your safety is at stake.