Behringer iAXE393 - ASH REMOVAL; ACCESSORIES

To Next Page

To Previous Page

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

• It is not recommended to leave the stove alight at night or to continue

using the stove in mild weather which gives poor combustion leading to a

greater buildup of soot.

• If overnight burning is required, it can best be achieved by first driving off

any gasses or moisture as usual, following a full charge of fuel and then

closing the air vents fully. Experience will indicate the optimum setting.

However, by reducing the burn rate to such a level that the fire is still

burning the following day, the burning process creates heavy, tarry

chemicals which will become deposited on the inside of the flue or

chimney. This is an inefficient process which greatly increases the risk of a

chimney fire and makes it necessary to sweep the chimney more often.

ASH REMOVAL

Keep the stove free from a heavy buildup of ash. The frequency of this is

dependant upon the type and quality of fuel being used. Ash should be

removed before it builds up to the underside of the grate, at which point, the

grate would be burning hot on both sides, shortening its life expectancy.

When disposing of ashes, ensure they have cooled and always place in a

metal container. Be sure to remove the ash when the fire is at its lowest point,

such as first thing in the morning.

The Ash Can Filter is ideal for use in conjunction with the Clarke range of

vacuum cleaners, for collecting hot ash and debris from stoves.

ACCESSORIES

Refer to the Clarke website www.clarkeinternational.com for a full range of

Flue Pipes & Cowls for use with this classic cast iron stove.

Other manuals for Behringer iAXE393