iNUKE Series Power Ampli ers
NU6000 — Ultra-Lightweight High-
Density 6000-Watt Power Ampli er
Delivers 2 x 3000 Watts into 4 Ohms,
2 x 1500 Watts into 8 Ohms and
weighs less than 12 lbs.
NU3000 — Ultra-Lightweight High-
Density 3000-Watt Power Ampli er
Delivers 2 x 1500 Watts into 2 Ohms,
2 x 880 Watts into 4 Ohms,
3000 Watts into 4 Ohms bridged and
weighs less than 7 lbs.
NU1000 — Ultra-Lightweight High-
Density 1000-Watt Power Ampli er
Delivers 2 x 500 Watts into
2 Ohms, 2 x 300 Watts into 4 Ohms,
1000 Watts into 4 Ohms bridged and
weighs less than 7 lbs.
Common features
Revolutionary High-Density Class-D
technology for ultimate performance
Ultra-e cient switch-mode power
supply for noise-free audio,
superior transient response and
low power consumption
Integrated limiters o er maximum
output level with reliable
overload protection
Built-in Subwoofer/Satellite crossover
for more exibility
Detented gain controls for precise
setting and matching of sensitivity
Precise Power, Signal and Limit LEDs
to monitor performance
Combo XLR and ¼ " TRS input
connectors for compatibility with
any source
Professional twist lock
speaker connectors
iNUKE Series power ampli ers pack
massive amounts of output power into
exceptionally lightweight, rack-mountable
packages. Our revolutionary high-density
Class-D technology combined with
ultra-e cient switch-mode power
supplies ensures these feather-light
powerhouses will drive your rig
e ortlessly for many years to come.
Superb transient response
We spent years ne-tuning the
high-density Class-D technology that
gives the iNUKE Series its oomph.
By carefully selecting transistors with
extremely high slew rates and optimizing
other proprietary parts of our circuitry,
these amps react instantly to even the
most demanding electronicbass impulses.
When this amazing ampli er
technology is combined with our
state-of-the-art switching-mode power
supplies, these ampli ers provide
tremendous punch. And because they are
so much more e cient than conventional
designs, they run cooler and don’t require
the massive heat sinks and heavy toroid
transformers typically associated with
their conventional counterparts.
Sublimely simple operation
The front panel controls and indicators
provide your system’s vital signs at a
glance. After pressing the Power button,
the Power LED lights to show the amp
is ready for action. All channels feature
positive-detent Gain controls with Signal
LEDs that light when a signal is present,
as well as clip LEDs to indicate when the
signal is distorted and you need to reduce
the input signal.
Continued on next page
iNUKE NU6000/NU3000
NU1000/NU6000DSP
NU3000DSP/NU1000DSP
Power Ampli ers
To Next Page
Need help?
General