Behringer NEUTRON - Neutron Setup Examples; Studio System Setup

REAR PANEL
(101) INPUT – External audio is injected
into the VCF.
(102) OUTPUT – Connect to a mixer or
audio interface using ¼" Jack cable.
(103) PHONES – Headphones output.
(104) PHONES LEVEL – Headphones
level control.
(105) MIDI CHANNEL SELECTION.
Move the four dip switches to select the
MIDI channel.
(106) MIDI THRU – Soft MIDI THRU.
(107) USB PORT – Capable of sending and
receiving MIDI information over USB.
(108) POWER SWITCH – Turns the
synthesizer on and o.
(109) POWER INPUT – Connect the
supplied power supply only.
MIDI CHANNEL DIP SWITCH SETTINGS
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
(EN) Step 2: Controls
20
NEUTRON