Behringer NEUTRON - Specifications

Specications
Synthesizer Architecture
Number of oscillators 2 x V3340
Type Analog
Oscillators 2 (0.7 Hz to 55 kHz across 4 ranges)
LFO 1 (0.01 Hz to 10 kHz)
VCF
1 (switchable low pass, band pass or high pass
(12 dB/octave slope), dual output
Envelopes 2 analog envelope generators
Connectivity
External input ¼" TS unbalanced 100 k impedance
Output ¼" TRS, balanced, max. 12 dBu
Headphones ¼" TRS, balanced
Headphones output impedance 8 
MIDI In/Out (soft Thru) 5-pin DIN/ 16 channels
USB (MIDI) USB 2.0, type B
USB
Type Class compliant USB 2.0, type B
Supported operating systems Windows 7 or higher/ Mac OS X 10.6.8 or higher
Oscillator Section
Controls
Tune (OSC 1 & 2): +1/-1 octave (8', 16' or 32') or +10/-10 (full range)
OSC mix: (linear blend control between OSC 1 & 2)
Shape (OSC 1&2): Tone Mod, Square, Sawtooth, Triangular or Sine
Pulse width: 0 to 100% (OSC 1 & 2)
Switches
Range (OSC 1 & 2): 8', 16' or 32' or full range (all 3 LEDs)
OSC sync: on/o
Paraphonic: on/o
LED
Octave (OSC 1 & 2) 8', 16' or 32' or +/-10 (all 3 LEDs)
Shape (OSC 1 & 2): Tone Mod, Square, Sawtooth, Triangular or Sine
Envelope 1
Controls
Attack: 300 µs to 5 s (linear attack)
Decay: 2.4 ms to 10 s (exponential decay)
Sustain: 0 V to 9 V
Release: 1.5 ms to 6 s (exponential release)
83
Quick Start Guide