Behringer NEUTRON - Page 85

Overdrive Section
Controls
Drive: 0 to 11
Tone: 0 to 10
Level: 0 dB to -∞
LED Drive amount indicator
Inputs (TS 3.5 mm)
OSC 1 Control voltage: 1 V per octave
OSC 2 Control voltage: 1 V per octave
OSC 1&2 Control voltage: 1 V per octave
INVERT IN inverts voltage
SHAPE 1 Control voltage: -5 V to +5 V
SHAPE 2 Control voltage: -5 V to +5 V
PULSE WIDTH 1 Control voltage: -5 V to +5 V
PULSE WIDTH 2 Control voltage: -5 V to +5 V
VCF IN Signal input
FREQ MOD Control voltage: -5 V to +5 V
RESONANCE Control voltage: -5 V to +5 V
OVERDRIVE IN Signal input
VCA IN Signal input
VCA CV Control voltage: -9 V to +9 V
DELAY IN Signal input
DELAY TIME Control voltage: -5 V to +5 V
E GATE 1 Control voltage: -5 V to +5 V (envelope triggers @ 1.5 V)
E GATE 2 Control voltage: -5 V to +5 V (envelope triggers @ 1.5 V)
SAMPLE & HOLD IN Signal input
SAMPLE & HOLD CLOCK Control voltage: -5 V to +5 V (S&H triggers @ 3 V)
LFO RATE Control voltage: -5 V to +5 V
LFO SHAPE Control voltage: -5 V to +5 V
LFO TRIG Control voltage: -5 V to +5 V (S&H triggers @ 1.6 V)
MULT (Multiple) Input Signal is duplicated on Mult 1 and Mult 2 outputs
ATT 1 IN Signal input
ATT 1 CV Control voltage: -5 V to +5 V
ATT 2 IN Signal input
SLEW IN Signal or CV input
SUM1(A) Signal input or CV input
SUM1(B) Signal input or CV input
SUM2(A) Signal input or CV input
SUM2(B) Signal input or CV input
85
Quick Start Guide