Behringer RD-9 - Parameters; Settings

21 RHYTHM DESIGNER RD-9 User Manual
13. Parameters
There are three dierent types of data les used by the RD-9. The contents of these le types are described herein.
Global Settings File
All of the RD-9’s Settings and Preferences are stored in the Global Settings le. This le is loaded from Storage Memory when the unit is powered on. The exact
contents of the le are described below:
Settings
Settings in the Global Settings le are automatically saved back to Storage Memory whenever they are changed.
Setting Name Description Values
Data Version From time to time, new versions of the RD-9 rmware will be released. This rmware will
contain both bug xes and new features. Additional parameters may be added to the Global
Settings Data le to support those new features. The Global Settings Data le is therefore
versioned to guarantee compatibility between rmware releases.
Product Variant The RD-9 is one of a number of Behringer products that sequence songs. This parameter is used
to distinguish between RD-9 Song Data les and other song data les.
Last Loaded Song Each time a song is loaded into the sequencer it is logged. When you power on the unit, the
last song to be logged before the unit was powered o will be loaded back into the sequencer.
1 – 16
Last Loaded Pattern Each time a pattern is loaded in the sequencer it is logged. When you power on the unit,
the last pattern to be logged before the unit was powered of will be loaded back into the
sequencer.
1 – 16
Device ID Each RD unit in a system can have its own unique ID number. 1 – 16
Clock Source Press Sync to cycle through the 4 clock source options. INT, MIDI, USB or CLK
Analog Clock Mode Choose the type of clock that the clock input follows. 1, 2, 4, 24 and 48PP
MIDI RX Channel Set the MIDI in receive channel. 1 – 16
MIDI TX Channel Set the MIDI out transmit channel. 1 – 16
MIDI to USB Thru Set MIDI in to send to USB Thru. On/O
MIDI Soft Thru Send all MIDI in Data to the MIDI out port. On/O
USB TX Channel Set the USB MIDI receive channel. 1 – 16
USB to MIDI Thru Set the USB MIDI transmit channel. 1 – 16
Voice Note Mappings (1 - 11) Send the USB MIDI in to the MIDI thru port. On/O
Song Chain Mode Voice MIDI note map. Can be changes from the default if desired. various
Enhanced Mode Chain songs together for live performance. 0 – Hold,
1 – Loop,
2 – Stop
Trigger Out Assign Set the enhanced mode. On/O
Set the trigger out to follow which voice 0 – Bass Drum,
1 – Snare Drum,
2 – LOW TOM,
3 – MID TOM,
4 – HI TOM,
5 – RIM SHOT,
6 – CLAP