Behringer RD-9 - Rear Panel Connections

9 RHYTHM DESIGNER RD-9 User Manual
3.2 Rear Panel connections
(65) (66) (67) (68) (69) (70) (71) (72) (73) (74) (75) (76) (77) (78) (79) (80) (81) (82) (83) (84) (85) (86)(87)
(65) POWER – Connect the supplied PSU and engage power switch to turn on.
(66) PHONES - Connect headphones via 6.35 mm (¼”) TRS connector.
(67) MONO – Main output via 6.35 mm (¼”) TRS connector.
(68) RETURN – Sums audio post lter bus.
(69) USB – Connect to a computer for updates and DAW control.
(70) MIDI IN – Accepts MIDI data from an external MIDI device such as a
sequencer or DAW.
(71) MIDI OUT – Output of MIDI data to an external MIDI device.
(72) MIDI THRU – A direct output of the MIDI IN to chain to other devices.
(73) RIDE INDIVIDUAL OUTPUT – Unbalanced output of the Ride.
(74) CRASH INDIVIDUAL OUTPUT – Unbalanced output of the Crash.
(75) HI HAT INDIVIDUAL OUTPUT – Unbalanced output of the Hi Hat.
(76) CLAP INDIVIDUAL OUTPUT – Unbalanced output of the Hand Clap.
(77) RIM SHOT INDIVIDUAL OUTPUT – Unbalanced output of the Rim Shot.
(78) HI TOM INDIVIDUAL OUTPUT – Unbalanced output of the High Tom.
(79) MID TOM INDIVIDUAL OUTPUT – Unbalanced output of the Mid Tom.
(80) LOW TOM INDIVIDUAL OUTPUT – Unbalanced output of the Low Tom.
(81) SNARE INDIVIDUAL OUTPUT – Unbalanced output of the Snare Drum.
(82) BASS INDIVIDUAL OUTPUT – Unbalanced output of the Bass Drum.
(83) TRIGGER OUT 1 RIM SHOT – +5 V 2 ms pulse to trigger external devices.
(84) TRIGGER OUT 2 CLAP – +5 V 2 ms pulse to trigger external devices.
(85) TRIGGER OUT 3 BD ASSIGNABLE – +5 V 2 ms pulse to trigger
external devices.
(86) SYNC IN – SYNC to external device transmitting clock information.
(87) SYNC OUT – SYNC external devices to the Rhythm Designer.