Behringer RD-9 - Track Control and Settings; Voice Control

8 RHYTHM DESIGNER RD-9 User Manual
3.1.10 Track Control and Settings
(47) MUTE – Activates mute menu.
(48) SOLO – Activates solo menu.
(49) STEP BUTTONS – Used to input step information into patterns and is also
used for various system tasks when used in conjunction with the (50)
SETTINGS button or for deeper editing.
(50) SETTINGS – Used in combination with the (49) STEP BUTTONS to select
dierent operational modes.
(51) AUTOFILL – Select and add a ll pattern.
3.1.11 Voice Control
(47)
(48)
(50)
(51)
(49)
(52)
(59)
(55)
(56)
(57)
(53)
(54)
(61)
(64)
(62)
(63)
(58)
(60)
(52) LEVEL – Level control for the 9 voices plus Accent.
(53) TUNE – Controls the pitch envelope depth applied to the bass drum,
changes the pitch of the drum sound for the snare/toms and controls the
frequency of the hats, ride and crash.
(54) ATTACK – Controls the Attack portion of the bass drum sound.
(55) DECAY – Changes the decay time of the voice. Turn CCW for shorter,
CW for longer.
(56) TONE – Applies a lter to the voice, reducing the high frequencies
as you turn CCW.
(57) SNAPPY – Adjust the amount of snap to the snare sound.
Turning CW increases snap.
(58) VOICE SELECT – Selects the voice for playing and editing patterns, wave
designer/lter, soloing or mute.
(59) PITCH DEPTH – Sets how much the pitch envelope aects the
bass drum oscillator.
(60) PITCH – Sets the frequency of the bass drum oscillator.
(61) CH DECAY – Changes the decay time of the closed hat voice.
Turn CCW for shorter, CW for longer.
(62) OH DECAY – Changes the decay time of the open hat voice.
(63) CRASH TUNE – Changes the pitch of the crash voice.
(64) RIDE TUNE - Changes the pitch of the ride voice.