Behringer RD-9 - Edit Section; Mode Section; Sync Section; Playback Controls

7 RHYTHM DESIGNER RD-9 User Manual
3.1.4 Edit Section
(11) SAVE – Save a song or pattern to a memory slot.
(12) COPY – Copy pattern from one location to another memory location.
(13) ERASE – Delete the selected song, pattern or settings.
(14) DUMP – Performs a MIDI SysEx Dump of pattern, song or settings.
3.1.5 Mode Section
(15) SONG – Enter Song Mode. Cue 1 of 16 songs.
(16) PATTERN – Enter Pattern Mode. Use the 16 available patterns to
build your song.
(17) STEP – Shows each available step for the selected voice
(up to 64 steps per pattern).
3.1.6 Sync Section
(18) CYCLE – Cycles through the various SYNC options when the sequencer is
stopped. Internal, MIDI, USB or TRIG (External Clock) options.
(19) INTERNAL – The unit is the sync master.
(20) MIDI – Sync is taken from MIDI in port.
(21) USB – Sync is taken from the USB port.
(22) TRIG – Sync is taken from the External Clock input.
3.1.7 Playback Controls
(23) TAP/HOLD – Set the tempo of the unit with 5 taps. Hold for quick
macro control.
(24) DISPLAY – Multi function 4-character display.
(25) RECORD – Enable/disable record mode.
(26) STOP – Stops the currently playing song or pattern.
(27) PLAY/PAUSE – Play or pause the current song or pattern.
(28) DATA – Encoder for data editing.
(29) DATA MODE – Cycles through the various Data Modes. Tempo, Swing,
Probability and Flam.
(30) TEMPO – Adjust the Tempo parameter when selected with the
DATA encoder.
(31) SWING – Adjust the Swing parameter or shue feeling when selected with
the DATA encoder (25% negative swing, 50% straight to 75% full swing).
(32) PROB – Adjust the probability factor of steps triggering.
(33) FLAM – Adjust the FLAM width.
3.1.8 Auto Scroll Section
(34) AUTO SCROLL – Step Mode: Keep play head visible. Pattern Mode: Advance
song when loop expires. If Auto Scroll is enabled for a pattern that has more
than 16 steps, when the play head advances beyond a 16-step boundary, the
steps will automatically switch pages to stay in sync with the play head.
(35) BANKS 16/32/48/64 – White shows bank position of play head in current
pattern. Red shows currently-viewed bank position.
(36) << (POSITION MOVE LEFT) - Step Mode: Choose viewed bank position.
Pattern Mode: Choose play head position within selected song.
(37) LENGTH – Step mode: Set the length of the selected pattern. Pattern Mode:
Set number of repeats for selected part within the song.
(38) >> (POSITION MOVE RIGHT) - Step Mode: Choose viewed bank position.
Pattern Mode: Choose play head position within selected song.
3.1.9 Step & Note Repeat Section
(39) 1 – Step or Note repeat of a value of 1.
(40) 2 – Step or Note repeat of a value of 2.
(41) 4 – Step or Note repeat of a value of 4.
(42) 8 – Step or Note repeat of a value of 8.
(43) STEP REPEAT – Repeats the step by the selected value.
(44) NOTE REPEAT – Repeats the note played with the trigger button by the
selected value.
(45) TRIGGER – Trigger repeats when engaged.
(46) 1/2/4/8 – Indication of number of repeats selected.
(11) (12)
(13)
(14)
(15) (16)
(17)
(18) (19) (20) (21) (22)
(29)(25) (26) (27)
(30) (31) (32) (33)(23) (24) (28)
(36) (37) (38)
(35)
(34)
(39) (40) (41) (42) (43) (44) (45)
(46)