29 RHYTHM DESIGNER RD-9 User Manual
14. DAW Control
The RD-9 can be used with a DAW in two main ways.
The rst method is using either MIDI or MIDI over USB to trigger the sounds on the RD-9. This allows complex programming from your computer using the note
numbers as described in section 11.4 MAP.
The 2nd way is to use Midi Time Code (MTC) to sync the RD-9 to your project. Dierent DAW packages work in dierent ways. Below is an example how to set up the
RD-9 in Logic X. Make sure the RD-9 is on its own MIDI channel in order not to trigger other sounds.
Preferences>MIDI>SYNC>MIDI Sync Project Settings>MIDI
In the Destination list select the RD-9. Turn the Clock on and select MTC. A delay may need to be used depending on DAW settings. On the RD-9 select USB from the
Sync options. Now the RD-9 and project will play back together.
To Next Page
Loading...
