Behringer RD-9 - Page 27

27 RHYTHM DESIGNER RD-9 User Manual
* Information useful for power users wishing to implement their own editors. Each of the 64 bytes in a track has its bits set/cleared as follows:
Bit 0 STEP_BYTE_MASK_ON_OFF_BIT – 1=Step On, 0=Step O
Bit 1 STEP_BYTE_MASK_ACCENT_ON_OFF_BIT – 1=Step On, 0=Step O
Bit 2 STEP_BYTE_MASK_PROBABILITY_BIT – 1=Step On, 0=Step O
Bit 3 STEP_BYTE_MASK_FLAM_BIT – 1=Step On, 0=Step O
Bit 4 STEP_BYTE_MASK_NOTE_REPEAT_ON_OFF_BIT – 1=Step On, 0=Step O
Bit 5 STEP_BYTE_MASK_NOTE_REPEAT_LS_BIT 00 = Repeat 1, 01 = Repeat 2, 10 = Repeat 4, 11 = Repeat 8
Bit 6 STEP_BYTE_MASK_NOTE_REPEAT_MS_BIT 00 = Repeat 1, 01 = Repeat 2, 10 = Repeat 4, 11 = Repeat 8
Bit 7 RESERVED
Pattern Length The step length of pattern. 1 - 64
Poly Length (1-11) The step length of each tracks. 1 - 64
Reserved
Random Tracks
(1-11)
Random of each tracks is enable or disable 0 = Disable,
1 = Enable
Random Steps
(1 – 64)
The sequencer events triggered on the 64 steps of the Random Steps track. 0 = Inactive,
1 = Active