Behringer SUPER FUZZ SF300 Manual

2
VINTAGE PHASER VP1
◊ ◊ The SF300 has no on/o switch. As soon as you insert the
plug into the in connector, the SF300 is on. When not in
use, remove the plug from the in connector. This extends
the life of the battery.
The SERIAL NUMBER is located at the underside.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 k
Out
Connector ¼" TS
Impedance 1 k
Power Supply
9 V𝌂, 100 mA regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
Europe/U.K./ 230 V~, 50 Hz
Australia
China 220 V~, 50 Hz
Korea 220 V~, 60 Hz
Japan 100 V~, 50/60
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may therefore differ from those listed or shown.

Behringer SUPER FUZZ SF300 Specifications

Power

power supply voltage	9 V
power supply current	100 mA
power consumption	30 mA

Input and Output

input connector	1/4" TS
input impedance	500 kΩ
output connector	1/4" TS

Weight and Dimensions

weight	0.33 kg
height	54 mm
width	70 mm