Behringer Ultra Octaver UO300 - ULTRA CHORUS UC200; Controls

ULTRA CHORUS UC200
Ultimate Stereo Chorus Eects Pedal
Thank you for showing your condence in us by purchasing
the Behringer ULTRA CHORUS UC200. This ultimate eects pedal
is designed to deliver super-thick chorus with unbelievable stereo eect.
Thanks to its high-performance features you’ll have full parameter
control for absolute exibility and limitless creative options.
The chorus eect slightly detunes the original signal. A very pleasant
detune eect is created in connection with the pitch variation.
The chorus eect is used often and quite extensively used
for dispersing signals.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The TONE control allows you to adjust the overall eects sound
and achieve a more dened and brilliant tone.
(3) The RATE control determines the chorus eect speed.
(4) Turn up the DEPTH control to achieve a fuller,
deeper eect sound.
(5) The ON/BATT LED illuminates when the eect is activated.
It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS INPUT connector to plug in the instrument cable.
(8) The two ¼" TS connectors OUT A and OUT B send the signal
to your amp. Use both connectors if you want to achieve
full stereo chorus eect. For mono use just plug in OUT A.
Use the DC IN connection to plug in a 9 V power supply (not included).
V 1.0
(5)
(1)
(6)
(7)
(3)
(2)
(4)
(8)
A50-00002-76619