Behringer X32 - 5.10 User Assignable control section

29 of 36
Product Information Document
40-Input, 25-Bus Digital Mixing Console
with 32 Programmable MIDAS Preamps,
25 Motorized Faders, Channel LCD’s,
32-Channel Audio Interface and
iPad/iPhone* Remote Control
Digital Mixers
X32
X-ADAT
High-Performance 32-Channel ADAT Expansion Card for X32
The X-ADAT Expansion Card allows you to digitally integrate your X32 with any equipment featuring
ADAT I/O. This includes stand-alone recorders, digital audio workstations, and other digital mixers
and signal processing gear. The X-ADAT card provides 32-channels of ADAT inputs and outputs on
its 8  ber-optic Toslink* connectors. The card features 24-bit signal transmission and operates at
both 44.1 and 48 kHz sample rates, maintaining your signal integrity. The X-ADAT card also has a BNC
word-clock in/out capability allowing it to sync with an external clock, or provide the clock signal for
other devices. External clock synchronization is possible through the BNC connection, as well as any
of the 4 Toslink ports.
X-DANTE
High-Performance 32-Channel Audinate Dante Expansion Card for X32
By installing the X-DANTE card in place of the X-USB card, your X32 will interface with Dante networks
using virtually any 100Mbit/s or Gigabit Network infrastructure with DSCP-based QoS – providing
dependable multi-channel audio that coexist with other IP-based data tra c on the same network.
The X-DANTE card utilizes 24-bit signal transmission with sample-accurate synchronization and low
latency, ensuring the highest audio integrity. And a secondary input allows you to set up a seamless,
redundant network. Full remote control of the X32 is possible using the integrated Ethernet switch.
When the X-DANTE card is connected to a computer, Audinate’s Dante Controller application gives
you full control over con guration and signal routing among your Dante-enabled devices.
X-MADI
High-Performance 32-Channel MADI Expansion Card for X32
The X-MADI Expansion Card brings even more I/O options to the X32 by instantly enabling it for
MADI networking. The MADI or AES10 protocol is quickly becoming an industry standard in many
broadcast applications. X-MADI provides optical duplex SC-plugs (IEC874-19) to connect with  ber-
optic MADI devices, with multimode  ber-optic cable lengths of up to 2 km supported. Dual BNC
terminals are also provided for transmission via standard 75-Ohm coaxial cable of up to 100 m length.
The BNC and  bre optic connectivity can also be used simultaneously, creating a reliable redundancy
network with  ber–optic installations. X-MADI card is the perfect solution for integrating the X32
into current installations using the MADI protocol.