Need help?Do you have a question about the Behringer xr18 and is the answer not in the manual?
General| Type | Digital Mixer |
|---|---|
| Channels | 18 |
| Mic Preamps | 16 |
| Aux Sends | 6 |
| MIDI I/O | In/Out |
| Wi-Fi | Yes |
| Rackmountable | Yes |
| Wireless Control | Yes |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Inputs | 16 x XLR/TRS Combo, 2 x TRS |
| USB Interface | 18 x 18 |
| Dynamic Processing | Gate, Compressor |
| Data I/O | Ethernet |
| Software | X Air app |
| EQ Bands | 4-band parametric per channel |
Explains IP addressing and DHCP client/server operations for mixer connection.
Details wired Ethernet/LAN connection modes and settings for the mixer.
Describes connecting the mixer as a Wi-Fi client to an existing network.
Explains setting up the mixer as an Access Point for wireless control.
Instructions for setting up and adjusting the noise gate parameters.
Details how to configure compressor and expander settings for dynamic control.
Guide to adjusting the EQ bands, frequency, and gain for each channel.
Saving and recalling entire show configurations and individual snapshots.
Reassigning analog/digital inputs and outputs to various destinations.
Adjusting the main and monitor bus EQ settings with parametric, graphic, or true EQ.
Covers phase invert, linking, phantom power, gain, and effect inserts.
Setting up and adjusting noise gate parameters for unwanted noise removal.
Adjusting EQ settings, including low cut and EQ type for selected bands.
Configuring compressor/expander settings for dynamic range control.
Saving and recalling specific mixer settings for quick recall.
To Next Page