Behringer xr18 - 9.2 XR16;XR12 Specifications

34 X AIR User Manual
9.2 XR16/XR12 Specications
XR16 XR12
Processing
Number of processing channels
16 input channels, 1 stereo USBreturn channel,
4stereo FXreturn channels, 6aux buses, main LR
16 input channels,1 stereo USBreturn channel,
4stereo FXreturn channels,
6aux buses, main LR
Internal eects engines 4 true stereo 4 true stereo
Signal processing 40-bit oating point 40-bit oating point
A/D-D/A conversion (Cirrus Logic A/D CS5368, D/A CS4385) 24-bit @ 44.1 / 48 kHz, 114dBdynamic range 24-bit @ 44.1 / 48 kHz, 114 dB A/D dynamic range
Analog I/O latency* 0.8 ms 0.8 ms
Connectors
Programmable mic preamps, designed by MIDAS 8 XLR/TRS combo jacks, balanced 4 XLR/TRS combo jacks, balanced
Line inputs 8 TRS, balanced 8 TRS, balanced
Main outputs 2 XLR, balanced 2 XLR, balanced
Aux outputs 4 XLR, balanced 2 TRS, balanced
Phones outputs 1 TRS 1 TRS
MIDI inputs / outputs 1/1 DIN 1/1 DIN
Ethernet 1 RJ45 1 RJ45
USB port Type A Type A
Mic Input Characteristics
Preamp design MIDAS MIDAS
THD + noise, 20 dB gain, 0 dBu out < 0.005%, A-weighted < 0.005%, A-weighted
Phantom power, switchable per input 48 V 48 V
Equivalent input noise level,
XLR (input shorted)
-128 dBu, A-weighted -128 dBu, A-weighted
CMRR, XLR, @ 20 dB gain (typical) >60 dB >60 dB
CMRR, XLR, @ 40 dB gain >65 dB >65 dB
Input/Output Characteristics
Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB 10 Hz - 22 kHz 10 Hz - 22 kHz
Dynamic range, analog mic in to analog out (typical) 105 dB 104 dB
A/D dynamic range, mic preamp to converter (typical) 109 dB 109 dB
D/A dynamic range, converter and output 108 dB 108 dB
Cross talk rejection @ 1 kHz, adjacent channels 90 dB 90 dB
Mic input impedance XLR jack, unbal. / bal. 5 kΩ / 10 kΩ 5 kΩ / 10 kΩ
Non clip maximum input level, XLR +23 dBu +23 dBu
Hi-Z input impedance TRS jack, unbal. / bal. 1 MΩ / 2 MΩ 1 MΩ / 2 MΩ
Line input impedance TRS jack, unbal. / bal. 20 kΩ / 40 kΩ 20 kΩ / 40 kΩ
Non clip maximum input level, TRS +21 dBu +21 dBu
Output Characteristics
Output impedance, XLR, unbal. / bal. 50 Ω / 50 Ω 50 Ω / 50 Ω
Output level, XLR, nom./max. +4 dBu / +16 dBu +4 dBu / +16 dBu
Output impedance, TRS, unbal. / bal. 50 Ω / 50 Ω 50 Ω / 50 Ω
Output level, TRS, nom./max. +4 dBu / +16 dBu +4 dBu / +16 dBu
Phones output impedance / level 40 Ω / +35 dBm (stereo) 40 Ω / +35 dBm (stereo)
Residual noise level, XLR and TRS -92 dBu, A-weighted -92 dBu, A-weighted
WLAN Module
Antenna External, SMA connector, 50 Ω External, SMA connector, 50 Ω
Access Point, number of clients Max. 4 Max. 4
IEEE 802.11 b/g standard 2.4 GHz 2.4 GHz
Frequency Range 2,412-2,462 MHz 2,412-2,462 MHz
WLAN channels (Wi Client, Access Point) 1-11 / 1-11 1-11 / 1-11
Max Output Power 19 dBm (802.11 b) / 18 dBm (802.11 g) 19 dBm (802.11 b) / 18 dBm (802.11 g)
Power
Switch-mode power supply Autorange 100-240 V, (50/60 Hz) Autorange 100-240 V, (50/60 Hz)
Power consumption 30 W 30 W
Physical
Standard operating temperature range 5°C – 40°C (41°F – 104°F) 5°C – 40°C (41°F – 104°F)
Dimensions 333 x 149 x 140 mm (13.1 x 5.9 x 5.5") 333 x 149 x 95 mm (13.1 x 5.9 x 3.7")
Weight 3.0 kg (6.6 lbs) 2.4 kg (5.3 lbs)
*including all channel and bus processing, excluding insert eects