Behringer XENYX 1202 - Important Safety Instructions; General Safety Warnings; Handling and Environment; Servicing and Electrical Safety

2 XENYX 1202 Technical Specifications
XENYX 1202
Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and British EQs
Premium ultra-low noise, high headroom analog mixer
4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic “British” 3-band EQs for warm and musical sound
1 post fader FX send per channel for external FX devices
Main mix outputs plus separate control room, phones and stereo CD/tape outputs
CD/tape inputs assignable to main mix or control room/phones outputs
FX to control room function helps to monitor eect signal via headphones and control room outputs
Long-wearing 60-mm logarithmic-taper master fader and sealed rotary controls
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Mono Inputs
Microphone Inputs (XENYX Mic Preamp)
Type XLR connector, electronically
balanced, discrete input circuit
Mic E.I.N.
1
(20 Hz - 20 kHz)
@ 0Ω source resistance -134dB / 135.7dB A-weighted
@ 50Ω source resistance -131dB / 133.3dB A-weighted
@ 150Ω source resistance -129dB / 130.5dB A-weighted
Frequency Response
<10Hz - 150kHz -1dB
<10Hz - 200kHz -3dB
Gain range +10dB to +60dB
Max. input level +12dBu @ +10dB GAIN
Impedance approx. 2.6kΩ balanced
Signal-to-noise ratio 110dB / 112dB A-weighted
(0dBu In @ +22dB GAIN)
Distortion (THD + N) 0.005% / 0.004% A-weighted
Line Input
Type ¼" TRS jack, electronically balanced
Impedance approx. 20kΩ balanced,
approx. 10kΩ unbalanced
Gain range -10dB to +40dB
Max. input level +22dBu @ 0dB GAIN
Fade-Out Attenuation
2
(Crosstalk Attenuation)
Main fader closed 90dB
Channel muted 89.5dB
Channel fader muted 89dB
Frequency Response (Mic In → Main Out)
<10Hz - 90kHz +0dB / -1dB
<10Hz - 160kHz +0dB / -3dB
Stereo Inputs
Type ¼" TRS jack, electronically balanced
Impedance approx. 20kΩ
Max. input level +22dBu
Equalizer
EQ Mono Channels
LOW 80Hz / ±15dB
MID 2.5kHz / ±15dB
HIGH 12kHz / ±15dB
EQ Stereo Channels
LOW 80Hz / ±15dB
MID 2.5kHz / ±15dB
HIGH 12kHz / ±15dB
Specications