Behringer XENYX 1204 - Important Safety Instructions; General Safety Warnings; Electrical Safety and Handling Precautions; Introduction to the XENYX Series

2 XENYX 1204FX Technical Specifications
XENYX 1204
Premium 12-Input 2/2-Bus Mixer with XENYX Mic Preamps,
British EQs and USB/Audio Interface
Premium ultra-low noise, high headroom analog mixer
4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic "British" 3-band EQs for warm and musical sound
USB/Audio Interface included to connect directly to your computer. Revolutionary energyXT2.5 Compact music production software included;
more free audio recording and editing software downloadable at www.behringer.com
2 aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for external FX devices
Peak LEDs and mute/alt 3-4 function on all channels
2 subgroups with separate outputs for added routing exibility
2 multi-functional stereo aux returns with exible routing
Balanced main mix outputs with gold-plated XLR connectors plus separate control room, headphones and stereo tape outputs
Control room/phones outputs with multi-input source matrix
Tape inputs assignable to main mix or control room/phones outputs
Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
Internal autorange power supply for maximum exibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption
for energy saving
Rack mount brackets included for ultimate exibility
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Mono Inputs
Microphone inputs (XENYX Mic Preamp)
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Line input
Type ¼" TRS connector
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level 30 dBu
Fade-out attenuation
1
(Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader closed 89 dB
Frequency Response
Microphone input to main out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Specications