Behringer XENYX 1204USB - X1832 USB Mixer Details; X1832 USB Front Panel Controls

Page 11 of 17
XENYX X2442USB
X2222USB / X1832USB
X1622USB / X1222USB
X1204USB / 1204USB
X1832USB
Building on the feature set of the
X1622USB, the X1832USB comes with
two additional mic strips (including
channel inserts), for a total of six XENYX
mic preamps. The onboard stereo
9-band graphic equalizer, which can be
assigned to the main or monitor buses,
provides superb system EQ and works
in conjunction with the FBQ feedback
detection circuitry to eliminate annoying
mic squeals. Other features include
full-sized faders for MON and FX SENDs,
along with our proprietary XPQ 3D stereo
surround eect and Voice Canceller.
The ultra-versatile X1832USB also has
an additional Aux Send (switchable
pre/post), for a total of three, and two
assignable subgroups.
X1832USB Front Panel
Mid Frequency,
variable 100 Hz
– 8 kHz
XLR mic input
with XENYX
preamp
¼" balanced/
unbalanced input
Low Cut lter
removes unwanted
infrasonics
Gain control
adjusts input
signal level
Compressor knob
adjusts compression
eect on channel
High EQ ±15
dB, centered
@ 12 kHz
Mid level ±15 dB,
variable center
frequency
Low EQ ±15 dB,
centered @ 80 Hz
Aux Sends
for Monitors
(1 x pre, 1 x pre/
post selectable)
and FX (post)
Pan control adjusts
position of signal
in stereo image
Mute switch
removes signal
from Main Mix
Mute & Clip LEDs
Solo & Sub/
Main assignment
switches
Channel fader
adjusts signal level
in Main Mix
Onboard FX
processor,
16 presets,
two parameter
controls
FX Send
control
9-band graphic
EQ with FBQ
Feedback
Detection and
assignment
switches
12-tier VU
meter with
+48 V and
Power LEDs
Aux 1 send
control
Main Mix
faders
Sub 1-2
faders
FX/Aux 2
Return level
fader
Monitor Send
level fader
Phones/CTRL
Room level
control
Phones/CTRL
Room source
mixing matrix
XPQ 3D level
and assignment
switch
Stereo Aux 1
Return level
Voice
Canceller
switch