EasyManua.ls Logo

Beko BT393SB - User Manual

Beko BT393SB
68 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BT393SB
2960313345_IT/ 07-06-22.(14:13)
IT / EN
Asciugatrice
Manuale utente
Dryer
User Manual

Table of Contents

Questions and Answers

  • S
    Sean ElliottAug 20, 2025
    Why do clothes come out damp after drying in my Beko Dryer?
    • M
      Melinda SloanAug 20, 2025
      If clothes are damp after a drying cycle in your Beko Dryer, it could be due to several reasons. You may have used a program not suitable for the type of laundry, the fibre filters (interior and exterior) might be clogged, or the condenser front side could be blocked. Overloading the machine or not wringing the laundry adequately beforehand can also cause this issue. Check the maintenance labels on your clothes and select an appropriate program, or use time programs as extra. Wash and dry the filters. Clean the condenser. Avoid overloading the dryer and ensure laundry is adequately wrung before drying.
  • J
    jacquelinecoxAug 22, 2025
    What to do if my Beko BT393SB Dryer does not turn on or the program cannot be started?
    • B
      Brittany ThomasAug 22, 2025
      If your Beko Dryer isn't turning on or the program won't start, first ensure the power cord is plugged in and the loading door is properly closed. Check that a program is selected and the dryer is not in Pause mode. Also, verify whether the child lock is activated and, if so, turn it off.
  • D
    Denise BrownAug 25, 2025
    What to do if the fibre filter cleaning icon is lit on my Beko BT393SB Dryer?
    • R
      rphillipsAug 25, 2025
      If the fibre filter cleaning icon is lit on your Beko Dryer, it means that the fibre filter (interior and exterior filter) may be unclean, a layer may be formed on the fibre filter pores that leads to clogging or fibre filters may not be inserted. Wash the filters with warm water and dry and insert the interior and exterior filters to their places.
  • T
    Tonya PhillipsAug 26, 2025
    Why does water drip from the loading door of my Beko BT393SB?
    • W
      Walter EvansAug 27, 2025
      If water drips from the loading door of your Beko Dryer, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
  • J
    John PatelAug 28, 2025
    Why does my Beko Dryer take so long to dry?
    • J
      jimmy71Aug 28, 2025
      Several factors can cause a Beko Dryer to take too long. The fibre filters (both interior and exterior) might be clogged, the condenser front side could be blocked, or the ventilation grills might be obstructed. Insufficient ventilation in a small installation area, lime buildup on the humidity sensor, overloading the machine, or inadequate wringing of the laundry beforehand can also extend drying times. To resolve this, wash and dry the fibre filters, clean the condenser, clear any obstructions from the ventilation grills, improve ventilation by opening doors or windows, clean the humidity sensor, avoid overloading the dryer, and ensure laundry is adequately wrung before drying.
  • A
    Alexandria MorrisAug 30, 2025
    What to do if the condenser warning icon is flashing on my Beko Dryer?
    • K
      kylewolfeAug 30, 2025
      If the condenser warning icon is flashing on your Beko Dryer, it indicates that the condenser front side may be clogged with fibres, or the fibre filters may not be inserted. Clean the front side of the condenser and ensure that the interior and exterior filters are properly inserted.
  • B
    burkeheatherAug 31, 2025
    What to do if the water tank warning symbol is on/flashing on my Beko BT393SB?
    • R
      Richard SanchezSep 1, 2025
      If the water tank warning symbol is illuminated or flashing on your Beko Dryer, it indicates that the water tank may be full and needs to be emptied. Alternatively, if your dryer is connected directly to a water drain, the water discharge hose might be collapsed and needs to be checked.
  • J
    jessica41Sep 2, 2025
    Why did my Beko BT393SB Dryer program terminate prematurely?
    • A
      adam30Sep 3, 2025
      A Beko Dryer program might end early if the loading door isn't completely closed, there's a power outage, or the water tank is full. Make sure the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Empty the water tank if it's full.
  • P
    Patricia MooreSep 4, 2025
    Why are my clothes shrunk, hardened, or spoiled after using my Beko BT393SB Dryer?
    • J
      Justin CollinsSep 4, 2025
      Clothes may shrink, harden, or spoil in your Beko Dryer if a program not suitable for the laundry type was used. Always check the maintenance labels on the clothes and select a program suitable for the clothes.
  • G
    Garrett RuizSep 6, 2025
    Why does my Beko BT393SB Dryer load door open by itself?
    • J
      Justin GarciaSep 6, 2025
      If the loading door of your Beko Dryer opens by itself, it might not be closed completely. Push the loading door until you hear the closing sound.

Beko BT393SB Specifications

General IconGeneral
BrandBeko
ModelBT393SB
CategoryDryer
LanguageEnglish

Related product manuals