Why doesn't my Beko WTK72041S Washer drain water?
If your Beko Washer isn't draining water, the drain hose might be clogged or twisted; clean or flatten it. Alternatively, the pump filter could be clogged; clean the pump filter.
Why does my Beko WTK72041S Washer not rinse well?
If your Beko Washer doesn't rinse well, the detergent's amount, brand, and storage might be inappropriate; use a suitable detergent, store it properly, and avoid extreme temperatures. Ensure the detergent is in the correct compartment. Also, check the pump filter and drain hose for clogs or folds.
What to do if the loading door of my Beko Washer cannot be opened?
The loading door of your Beko Washer might not open due to several reasons. The door lock may be activated because of the water level; drain the water by running the Pump or Spin programme. The machine could be heating water or at the spinning cycle; wait until the programme completes. The child lock might be engaged; wait a couple of minutes after the programme ends for deactivation. The door might be stuck due to pressure; try pushing and pulling the door to release it.
Why is my Beko Washer vibrating or making noise?
There are several reasons why your Beko Washer might be vibrating or making noise. It could be standing unbalanced, so try adjusting the feet to level it. A hard substance might have entered the pump filter, requiring you to clean it. Ensure the transportation safety bolts have been removed. The laundry quantity might be too little or too much; adjust the load accordingly. Also, check that the machine isn't leaning on anything.
Why does washing take longer than specified in the manual for Beko WTK72041S Washer?
Several factors can cause your Beko Washer to take longer than expected. Low water pressure causes the machine to wait until it takes in enough water. Low voltage prolongs washing time to avoid poor results. Low input water temperature extends the heating time. An increased number of rinses or amount of rinse water can also lengthen the cycle. Excessive foam might activate the automatic foam absorption system, further extending the wash time; use the recommended amount of detergent.
Why does my Beko WTK72041S discharge water immediately?
If your Beko Washer immediately discharges the water it takes in, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.
Why doesn't my laundry smell like softener after using my Beko WTK72041S?
If your laundry doesn't smell like softener after washing in your Beko Washer, the detergent may be in the wrong compartment; put it in the correct one and clean the dispenser with hot water. Also, the detergent might be mixed with the softener; avoid mixing them and clean the dispenser.
Why did my Beko WTK72041S Washer stop shortly after the programme started?
Your Beko Washer might have stopped temporarily due to low voltage. It will resume running when the voltage restores to the normal level.
General| Type | Front Load |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Programs | 15 |
| Noise Level Washing | 58 dB |
| Energy Consumption per 100 Cycles | 49 kWh |
To Next Page
