Beko WTV 7516 BW User Manual (English)

Questions and Answers:

T
Tonya MeyerSep 6, 2025
Why does too much foam form in my Beko WTV 7516 BW?
- A
  andrew60Sep 6, 2025
  Excessive foam in your Beko Washer can be due to using improper detergents for the washing machine, so use detergents appropriate for washing machines. You might be using an excessive amount of detergent, so use only a sufficient amount. The detergent may have been stored under improper conditions, so store it in a closed, dry location, away from excessive heat. Some meshed laundry, like tulle, may foam too much due to its texture, so use smaller amounts of detergent for these items. Ensure the detergent is placed in the correct compartment.
K
Karen MorrisSep 7, 2025
What to do if my Beko WTV 7516 BW Washer stopped shortly after the programme started?
- E
  Edward CastilloSep 7, 2025
  If your Beko Washer stopped shortly after the programme started, it might have stopped temporarily due to low voltage. It will resume running when the voltage restores to the normal level.
J
jenniferduncanSep 8, 2025
Why does my Beko WTV 7516 BW Washer leave stains or not whiten laundry?
- B
  Brian WallSep 8, 2025
  If your Beko Washer leaves stains or doesn't whiten laundry, you might be using an insufficient amount of detergent, so use the recommended amount appropriate for water hardness and the laundry. Avoid overloading the machine, and load with the amounts recommended in the Programme and consumption table. Ensure you've selected the proper programme and temperature for the laundry. Verify you're using the correct type of detergent, specifically an original detergent appropriate for the machine. Also, avoid using too much detergent and put the detergent in the correct compartment, and do not mix the bleaching agent and the detergent with each other.
N
Noah WeaverSep 10, 2025
Why isn't the programme time counting down on my Beko WTV 7516 BW?
- R
  Ryan MaloneSep 12, 2025
  The timer on your Beko Washer might stop during water intake until the machine takes in adequate water to avoid poor washing results due to lack of water. The timer may also stop during the heating step until the machine reaches the selected temperature. Additionally, the timer can stop during the spinning step if the automatic unbalanced load detection system is activated because of the unbalanced distribution of laundry in the drum.
S
susan15Sep 12, 2025
Why does laundry turn gray after washing in my Beko WTV 7516 BW?
- J
  John SheltonSep 12, 2025
  If laundry turns gray after washing in your Beko Washer, it could be due to insufficient detergent used over a long period. Use the recommended amount of detergent. Washing at low temperatures for a long time can also cause this, so select the proper temperature for the laundry. Insufficient detergent with hard water can cause soil to stick to the cloth, turning it gray, so use the recommended amount of detergent appropriate for water hardness and the laundry. Using too much detergent can also be a factor, so stick to the recommended amount.

Beko WTV 7516 BW Specifications

General

Capacity	7 kg
Spin Speed	1200 rpm
Energy Efficiency Class	A+++
Dimensions (H x W x D)	84 cm x 60 cm x 49 cm
Weight	70 kg
Maximum Spin Speed	1200 rpm
Noise Level (Washing)	56 dB
Water Consumption per Year	9900 L
Programs	15
Color	White
Type	Front Load Washing Machine