Belden Grass Valley K-Frame - Source Table File Operations; Linking Busses One-To-One

190 K-FRAME — User Manual
Section 5 — Switcher Control
Source Table File Operations
Source Tables are part of GV Switcher file operations: File Ops, Source
Tables menu. You can perform all the same file operations: copy, paste,
save, load, etc., as with other File Ops menus. For more about File Oper
-
ations, see File Operations on page 59.
Linking Busses one-to-one
1. In the Links Setup menu, select the Controlling Bus data pad.
2. Select the ME/Aux/eDPM menu tab.
3. Select the desired bus or eDPM input.
4. Select the Linked Bus data pad and repeat Steps 1-3.
The Link Setup menu displays the newly linked busses in the Current
Link pane. The link is enabled and the Standard Source Table is selected
as the default (Source Tables are grayed out).
You can disable or break the link using the Enable/Break buttons in the
Current Link pane (the
Enable button in the Table Setup pane will also
enable/disable the selected link).