K-FRAME — User Manual 481
ClipStore
3. Mark a thumbnail if desired (optional).
a. Determine where you want to mark thumbnail and select the Mark
Thumbnail
data pad, or
b. Enter the mark-thumbnail point in the pop-up keypad and select
Enter.
4. Select the Make Subclip(s) button.
The new clip is created and appears in the clip lists in the ClipStore menus.
File Operations
ClipStore file transfers are performed in the ClipStore Library menu. Select
Image Store, Library. Files can be imported or exported using the Copy/Paste
(or
Cut/Paste in the case of ClipStore to ClipStore folder transfers) buttons
in the To and From ClipStore and Disk/Folder menu tabs.
Note File renaming is not supported in the ClipStore Library menus.
File transfers can be performed from/to the following locations from the
GV Switcher Menu Panel:
• ClipStore Server,
• Image folder on the GV Switcher Menu Panel,
• USB Storage Devices (seen as Removable Disks) and
• External USB Disk Drives (seen as Hard Disk Drives).
USB storage devices can be inserted into the USB ports on both the Clip-
Store server and on the GV Switcher Menu Panel. Memory Sticks will be
seen as Removable Disks and will be displayed in the From Disk/Folders
and To Disk/Folders menu tabs. External USB Disk Drives will also be seen
in the From and To Disk/Folders menu tabs however first a shared folder
is needed on the device (see
Creating a Shared Folder for External USB Disk
Drives on page 482).
To Next Page
