SNMP
Community
Use the SNMP configuration screen to display and modify parameters for the Simple Network
Management Protocol (SNMP). A computer attached to the network, called a Network
Management Station (NMS), can be used to access this information. Access rights to the agent
are controlled by community strings. To communicate with the Belgacom b-box, the NMS must
first submit a valid community string for authentication.
Parameter Description
Community A community name authorized for
management access.
Access Management access is restricted to Read
or Write.
Valid Enables or disables the entry.
Note: Up to 5 community names may be entered.
67
To Next Page
Loading...