Troubleshooting Chart
Symptom Action
Management Problems
Cannot
connect
using the
Web browser
• Be sure to have configured the Belgacom b-box with a valid IP address,
subnet mask, and default gateway. • Check that you have a valid network
connection to the Belgacom b-box and that the port you are using has not been
disabled. • Check the network cabling between the management station and the
Belgacom b-box.
Forgot or lost
the password
• Press the Reset button on the rear panel (holding it down for at least five
seconds) to restore the factory defaults.
85
To Next Page
Loading...