Changing System Settings
28
Setting WPA2-Personal (AES)
1.
From the “Security Mode” drop-down menu, select
“WPA2-Personal (AES)”.
2. For “Encryption Technique”, select “AES”. This setting will have to be
identical on the clients that you set up.
3. Enter your pre-shared key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be used
on all of the clients that you set up. For example, your AES might be
something like: “Smith family network key”.
4. Click “Apply Changes” to finish. You must now set all clients to match
these settings.
To Next Page
Loading...
