Changing System Settings
30
3. The following message will appear. Restoring the defaults includes
restarting the Adapter. It can take up to 60 seconds. It is important not
to turn the power off on the Adapter during the restart.
4. A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Adapter’s defaults will be restored. The
Adapter home page should appear automatically. If it does not, type in
the Adapter’s address (default =192.168.2.254) into the navigation bar
of your browser.
Save Current Settings
You can save your current configuration by using this feature. Saving
your configuration allows you to restore it later if your settings are lost
or changed. We recommend that you back up your current configuration
before performing a firmware update.
1. Click “Save”. A window called “File Download” will open. Click “Save”.
To Next Page
Loading...
