Troubleshooting
25
section
1
2
3
4
5
6
3. The window that opens should have a list of “Available
Networks”.
Available networks are wireless networks to which you can
connect.
If you are using a Belkin 802.11g (G Plus) Router, or
Belkin 802.11g (54g) Router, “Belkin54g” is the default name. The
name of your wireless network appears in “Available Networks”.
If you are using a Belkin 802.11b Router, the default name should
be “WLAN”.
If you are NOT using a Belkin Router, please consult your router
manufacturer’s user manual for the default name.
The name of your wireless network appears in “Available
Networks”.
If the correct network name is listed in the “Available Networks” list,
please follow the steps below to connect wirelessly:
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you will need
to enter the network key. Click “Connect”. For more information
regarding security, see the page entitled: “Securing your Wi-Fi
Network” on page 14 of this User Manual.
3. Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating a successful
connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
To Next Page
Loading...
