Belkin N600 DB User Manual

3
GETTING STARTED
Connect to Your Router
Retrieve the network ID card from the foot of your new Belkin Router.
Can’t find the card? The default network name and
password are also printed on the foot of the Router.
Use your computer, tablet, or smartphone to connect to
the wireless network shown on the network ID card.
For information on how to connect your wireless devices, please
see the “Connect Your Wireless Devices” section on page 20.
When requested, please enter the password
(security key) provided on the card.
When your device has connected to the Router, use a browser
to visit http://router/. The router homepage will appear.

Belkin N600 DB Specifications

General

Frequency Bands	2.4 GHz, 5 GHz
Ports	4x 10/100 Ethernet LAN, 1x 10/100 Ethernet WAN
USB Ports	1x USB 2.0
Security	WPA, WPA2, WEP
Antennas	Internal
Wireless Standard	802.11a/b/g/n
Max Data Rate	300 Mbps (2.4 GHz), 300 Mbps (5 GHz)