Belkin N600 DB User Manual

2
GETTING STARTED
How to Set It Up
Connect Your N600 DB Router
Turn off your modem by disconnecting its power supply. Some
modems have a battery backup; this will need to be disconnected at
this time as well.
Connect your Router to your modem using the cable
(already attached).
Power up your modem by plugging in its power supply. If your modem
has a battery backup, it can be reconnected at this time; you may
need to hold the reset button for 10 seconds.
Power up your Router by plugging in its power supply.

Belkin N600 DB Specifications

General

Frequency Bands	2.4 GHz, 5 GHz
Ports	4x 10/100 Ethernet LAN, 1x 10/100 Ethernet WAN
USB Ports	1x USB 2.0
Security	WPA, WPA2, WEP
Antennas	Internal
Wireless Standard	802.11a/b/g/n
Max Data Rate	300 Mbps (2.4 GHz), 300 Mbps (5 GHz)