EasyManuals Logo

Belkin SOUNDFORM User Manual

Belkin SOUNDFORM
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
True Wireless Earbuds
Initial pairing
From the factory, your earbuds come in pairing mode. If you just
purchased the earbuds, simply open the charging case and remove
the earbuds from it. The indicator lights on the earbuds will alternate
between blue and white..
Step 1: On your mobile device, turn ON Bluetooth to begin
searching for nearby devices.
Step 2: When your earbuds are detected, it will show as
SOUNDFORM True Wireless Earbuds. Tap on the name to complete
pairing. Your earbuds will make a confirmation sound once paired.
It will also show on your phone or tablet as a paired device.
Audio Playback
Control Left Earbud Right Earbud
Volume up ( + ) Tap one time
Volume down ( - ) Tap one time
Pause / Resume playback Tap two times Tap two times
Next track Tap three times
Previous track Tap three times
Call Handling
Control Left Earbud Right Earbud
Accept / End call Tap two times Tap two times
Reject call Hold for 2 seconds Hold for 2 seconds
Virtual Assistants
Control Left Earbud Right Earbud
Activate virtual assistant Hold for 2 seconds Hold for 2 seconds
How to use the touch controls on the Belkin AUC002
6sec
10sec
1 2
Set your earbuds to pairing mode
Step 1: Ensure your earbuds are turned OFF. To do this, press on both
earbuds and hold for 6 seconds and then release.
Step 2: Verify that your earbuds are turned OFF, then press and hold
on both earbuds for 10 seconds. This will turn your earbuds back ON
and place them into pairing mode. You can now proceed with pairing
your earbuds.
10 sec6 sec
6sec
10sec
How to unpair your earbuds
Your earbuds should be turned OFF. To do
this, you can do either of the two options:
a. Press on both earbuds for 6 seconds.
b. Return the earbuds to the charging case
and close the lid.
To unpair them, follow the instructions below:
For Android™
Step 1: Go to Settings.
Step 2: Tap on Connections > Bluetooth.
Step 3: Under Paired devices, select the
paired earbuds then tap Unpair.
For iOS
Step 1: Go to Settings.
Step 2: Tap on Bluetooth.
Step 3: Under MY DEVICES, tap the info
icon on the paired earbuds and then tap
on Forget This Device.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Belkin SOUNDFORM and is the answer not in the manual?

Belkin SOUNDFORM Specifications

General IconGeneral
Water ResistanceIPX5
Driver Size6mm
Charging Time2 hours
Frequency Response20Hz - 20kHz
MicrophoneYes
TypeTrue Wireless
Wireless Range10 meters
Weight5 grams per earbud

Related product manuals