8584
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
3. The “Update Firmware”
box will now display
the location and name
of the firmware file
you just selected.
Click “Update”.
4. You will be asked if
you are sure you
want to continue.
Click “OK”.
5. You will see one
more message. This
message tells you
that the Router may
not respond for as
long as one minute
as the firmware is
loaded into the Router
and the Router is
rebooted. Click “OK”.
6. A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Router’s firmware update will be
complete. The Router’s home page should appear automatically.
If not, type in the Router’s address (default = 192.168.2.1) into
the navigation bar of your browser.
The firmware update is complete.
To Next Page
Loading...
