Bell B35E 6X6 ADT User Manual

O
P
E
R
A
T
O
R
'
S
M
A
N
U
A
L
E
#
A
D
T
'
S
&
H
A
U
L
E
R
S
1
0
3
OPERATION
OPERATING COMPONENTS
High Hydraulic Fluid Temperature
Warning Light
If the high hydraulic fluid temperature warning light
flashes, the machine must be stopped immediately.
The high hydraulic fluid temperature warning light
flashes when the hydraulic fluid temperature
exceeds 95°C/100°C (203°F/212°F)
If overheating occurs stop the machine, engage
neutral and allow the engine to run at 1 500 rpm.
until the hydraulic temperature returns to normal
temperature and the warning light extinguishes.
Check the fluid levels.
The main warning light and the warning buzzer are
also activated with the high hydraulic fluid
temperature warning light.
Engine Air Filter Indicator Light
The engine air filter indicator light (14) illuminates
when the air element is blocked and needs to be
replaced.
Torque Limiter Active(LIM)
Torque Limiter Active(LIM) warning light will
illuminate when Engine Torque output of the truck is
being limited. (Refer to the DEF & LIM Warning
Light Trigger & Detection) Table on the next page.

Bell B35E 6X6 ADT Specifications

General

Brand	Bell
Model	B35E 6X6 ADT
Category	Trucks
Language	English