OPERATION
OPERATING COMPONENTS
Sealed Switch Module (SSM)
When a switch is activated a signal light will come on. On some buttons a corresponding message
will be displayed via the on-board display screen.
1. Air Conditioning On/Off Switch
2. Air Re-circulation Switch
3. Blower Fan Speed Switch
4. Air Conditioner Temperature (decrease) Switch
5. Air Conditioner Temperature (increase) Switch
6. Air Flow Direction Switch
7. Rotating Beacon Light Switch
8. Light Switch
9. Working Lights Switch
10. Windscreen Washer/Wiper Switch
11. Mirrors Defrost Switch
12. Ignition On/Engine Start Switch
13. Ignition Off/Engine Stop Switch
14. Hazard Lights Switch
15. Park Brake Switch
16. Forward Drive Selection Switch
17. Neutral Selection Switch
18. Reverse Drive Selection Switch
19. Gear Hold Switch
20. Differential Lock Switch/Inter-axle Differential
Lock
21. “i-Tip” Switch
22. Bin-Up Switch
23. Bin-Down Switch
24. Retarder/Speed Control (decrease) Switch
25. Retarder/Speed Control (increase) Switch
NOTE
The number at the bottom of some of the
switches is used for numerical inputs
required by some menus.
All switches are push buttons with LEDs
incorporated.
To Next Page
Loading...
Need help?
General
