Bell B45E 6X6 ADT User Manual

O
P
E
R
A
T
O
R
'
S
M
A
N
U
A
L
E
#
A
D
T
'
S
&
H
A
U
L
E
R
S
1
0
7
OPERATION
OPERATING COMPONENTS
Rotating Beacon Light
The rotating beacon light is mounted on the left
hand side of the cab roof and is switched ON from
the switch on the SSM.
Windscreen Washer Water Reservoir
The windscreen washer reservoir is located at the
left side of the cab under the bonnet.
To refill the water bottle:
1. Open bonnet.
2. Remove the filler cap (2) and fill the bottle (1)
with a window cleaning solution.
3. Ensure that the cap (2) is replaced securely.
4. Check electrical connection and fluid delivery
hose for wear/damage and operation.
WindscreenWiperAndWasherNozzle
The machine is fitted with a dual windscreen wipers
(1) which is equipped with a washer nozzle (2).
The wiper/washer switch is located on the SSM and
activates the windscreen wiper motor and/or
washer.
Bonnet Opening and Closing
The Bonnet is opened and closed using the bonnet
switch located inside the cab. See "Bonnet Switch"
for more details.
Remove Failed Bonnet Actuator Catch
Procedure
Tools Required: Ratchet, (2x) 250 mm extensions
and 18 mm socket.
NOTE
This is a two man operation.
Gain access to the actuator bracket through the
hole in the bumper as shown in the illustration
below.

Bell B45E 6X6 ADT Specifications

General

Brand	Bell
Model	B45E 6X6 ADT
Category	Trucks
Language	English