Bell Fibe Internet User Manual

17
Changing existing wireless settings
1. Openyourwebbrowser.
2. Type 192.168.2.1 in the address bar, press Enter. If you are prompted to
enter in a username and password, these are set to the following
defaults:
Username: admin
Password: admin
If you have changed the default password, you must enter in that
password.
3. Click Wireless from the left menu.
FibeInternet_ConnectionHub_ReferenceGuide_Eng_V7 17 11-06-24 4:09 PM

Bell Fibe Internet Specifications

General

Brand	Bell
Model	Fibe Internet
Category	Switch
Language	English