Bell SPV26 - Technical Data

SPV26
5
English
2 - TECHNICAL DATA
Noise £ 85 dB(A) measured at the height of the operators ear in the working position with the log splitter in operation
· The ears must be suitably protected (ear defenders).
· If the log splitter is connected to a tractor, machine noise is amply covered by that of the tractor.
Fig.2 Maximum size of
the log to be split
Recommended oils
We recommend use of the
following oils for the hydraulic
cylinder:
SHELL TELLUS T22
ARAL VITAM GF22
SP ENERGOL HCP22
MOBIL DTE11 or equivalent
DO NOT USE OTHER GRADE
OILS.
For the type of oil to be used
with the SPV26-BS model with
petrol or diesel engine, refer to
the engine manufacturers
recommendations given in the
related booklet.
7(&+1,&$/'$7$639
( 7 %6 ,7 *, *&
Lenght (mm) 620 620 620 730 730 790
Widht (mm) 730 730 730 730 730 730
Height (mm) 1760 1760 1760 1760 1760 1760
Weight (Kg) 152 152 147 126 108 156
Max. working pressure (bar) 180 180 180 180 180 180
Max. force (tons.) 8 8 8 8 8 8
Log capacity (mm) 1050 1050 1050 1050 1050 1050
Pump capacity (cc/round) 8,3 8,3 8,3 8,3 8,3 8,3
hydraulic oil tank capacity (Lt.) 6 6 6 6 6 6
Huydraulic oil total capacity (Lt.) 9 9 9 9 9 9
Supply
230V 50Hz
Single-ph.
230V 50Hz 3-ph.
400V 50Hz 3-ph.
Premium
grade fuel
From tractor
hydraulic
system
Pump on
power take-off
Pump for cardan
shaft
Absorption 15,6A
230V 3-ph.: 16,1A
400V 3-ph.: 9,3A
----- ----- ----- -----
Power 3Hp - 2,2KW 4Hp - 3KW 5Hp ----- ----- -----