EasyManuals Logo

Bella extract-pro User Manual

Bella extract-pro
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3
ELECTRICAL SAFETY
WARNINGS!
Read these instructions thoroughly before using this appliance or connecting it to
the mains supply.
A 13 amp BS1362 ASTA approved fuse must be tted.
This appliance must not be earthed.
There are no user-serviceable parts inside this appliance. Always refer servicing to
qualied service personnel.
The mains lead of this product is not replaceable by the user. If the mains lead is
damaged, do not use until the appliance has been inspected and approved by a
qualied electrician.
Do not allow this product to be exposed to rain or moisture during use or storage.
Before switching on, make sure that the voltage of your electricity supply is the same
as that indicated on the rating plate. Connecting it to any other power source may
cause damage.
This product may be tted with a non-re-wireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be retted. If the fuse cover becomes lost or
damaged, the plug must not be used until a suitable replacement is obtained.
If the plug has to be changed because it is not suitable for your socket, or due to
damage, it should be cut off and a replacement tted. Follow the wiring instructions
shown. The old plug must be disposed of safely because inserting it into a 13 amp
socket could cause an electrical hazard.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bella extract-pro and is the answer not in the manual?

Bella extract-pro Specifications

General IconGeneral
BrandBella
Modelextract-pro
CategoryBlender
LanguageEnglish

Related product manuals